F. Jannone AG

Official distributor for Leister Switzerland

Civil engineering & tunnel construction

GEOSTAR G5/G7

With the GEOSTAR G5 and G7 hot wedge welding machines for welding geosynthetic plastic sealing sheets (PSS). They enables smooth-motion sliding of the geomembranes thanks to new wedge geometry and three different parking and maintenance positions. The G5 weighs 16.4 kg and his steel wedge measures 90 x 50 mm. The G7 weighs 17.7 kg and his steel wedge measures 130 x 50 mm.

GEOSTAR G5/G7

  • Welding speed up to 12 m/min
  • Digital display of joint pressure, speed and hot wedge temperature
  • Very high heating capacity / heating power
  • Welding wedge replacement in less than 1 minute!
  • Integrated voltage display
  • Adjustable chassis height
  • Materials: HD-PE 0.8 - 3.0 mm; PP, LD-PE, TPO, FPO (other materials on demand)

TRIAC AT, le robuste appareil de soufflerie à air chaud

The TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic.

TRIAC AT, das robuste Heissluftgerät

  • Suitable for the work site
  • Closed loop controlled temperature
  • Open loop controlled air volume
  • Intelligent «e-Drive» operating unit
  • Ergonomic handling
  • Modern design

TRIAC S, the economical hand tool

The TRIAC S is used worldwide and he is very reliable, compact and robust.

TRIAC S, das kostengünstige Handgerät

  • Cooled protective tube
  • Electronic protection of the heating element
  • Automatic switchoff at minimum carbon brush length
  • Multiple replacement of carbon brush possible
  • Suitable for continuous operation

TRIAC ST, the ergonomic hand tool

The TRIAC ST is the successor model of the TRIAC S. it is primarily used for welding and processing plastic.

TRIAC ST, das ergonomische Handgerät

  • Suitable for the work side
  • Ergonomic handling
  • Low weight (less than 1 Kg)
  • The nozzles are compatible with the Triac S and the Triac AT
  • Quick clean air filters
  • Automatic carbon stop (collector protection) and heating element protection

ASTRO USB, the hot-wedge welding machine

The ASTRO USB is used anywhere all over the world. It welds up to five meters per minute. Its robust design and easy handling make it the perfect workhorse. The ASTRO USB allows for the consistent regording of all relevant welding parameters.

ASTRO USB Der Heizkeil-Schweissautomat

  • High welding performance
  • Digital display of temperature, speed and voltage
  • Extra-practical one-handle operation
  • Steplessly adjustable welding pressure
  • Controlled temperature and drive
  • Digital display of pressure
  • Acoustic alarm if limit value is exceeded
  • USB memory system

ASTRO, the hot-wedge welding machine

With 5 m/min., the fastest hot-wedge welding machine ASTRO for HDPE geomembranes of up to 3 mm thickness. Temperature and drive are regulated.

ASTRO, der Heizkeil-Schweissautomat

  • High welding performance
  • Digital display of temperature, speed and voltage
  • Extra-practical one-handle operation
  • Steplessly adjustable welding pressure
  • Controlled temperature and drive

 

COMET USB, the hot wedge welding machine

The compact heavy-duty welding machine COMET USB is in use worldwide. The small powerhouse is specially designed for the demands of landfills sites, mines and tunnels. Documetation made simple: COMET USB's memory system is designed for use on construction sites. Because this compact hot-wedge welding machine records all relevant welding parameters, data transfer is mere chid's play.

COMET USB

  • Digital display of welding pressure
  • Complete recording of all relevant welding parameters.
  • USB memory system designed for use on construction sites
  • Convenient data transfer

COMET, the hot wedge welding machine

The COMET is our smallest and handiest hot wedge welding machine (only 7.5 kg), with integrated operating unit for civil engineering.

COMET, Der Heizkeil-Schweissautomat

  • Perfected drive technology to meet the highest operational demands, with smallest size
  • Digital display of temperature and speed
  • Optionally with data recording on a memory card
  • Controlled temperature and drive system
  • User-friendly

TRIAC DRIVE AT with guide aid

The TRIAC DRIVE AT is an easy-to-use, semi-automatic lap welding machine for universal use in all conditions.

TRIAC DRIVE AT mit Führungshilfe

  • Lap welding of PVC-P, ECB, EPDM, CSPE and TPO roofing membranes
  • Faster and more economical than hand welding
  • Small and compact
  • Speed infinitely variable for higher quality of the welding seam
  • Can be used in the most confined spaces
  • Various welding seam widths

TRIAC DRIVE AT, the lap welding machine

The TRIAC DRIVE AT is an easy-to-use, semi-automatic lap welding machine for universal use in all conditions.

TRIAC DRIVE AT, zum Überlappschweissen

  • Lap welding of PVC-P, ECB, EPDM, CSPE and TPO roofing membranes
  • Faster and more economical than hand welding
  • Small and compact
  • Speed infinitely variable for higher quality of the welding seam
  • Can be used in the most confined spaces
  • Various welding seam widths

TWINNY S, teh Combi-wedge welding machine

The TWINNY S ist specially well suited for overhead welding in tunnel engineering. Combi-wedge welding machine with stepless adjustable temperature and drive.

TWINNY S, der Kombikeil- Schweissautomat

  • Easy operation
  • Low weight
  • High welding speed
  • Stepless adjustable temperature and drive
  • Even under harsh environmental conditions perfect welding results thanks to hot-air system

TWINNY T USB, the welding machine

The TWINNY T USB is excellent for welding PVC and other thin or soft membranes. It is available either with or without air-test channel. The TWINNY T USB, which makes data storage and display easy with a USB flash memory system, is perfect for critical applications where constant real-time monitoring of promary weld conditions can be stored and displayed

TWINNY T USB, der Kombi-Keil Schweissautomat

  • Digital display of welding pressure
  • Complete recording of all relevant welding parameters
  • USB memory system
  • Data transfer made simple

TWINNY T, the comb-wedges welding machine

The TWINNY T is for civil engineering. With easily replaceable combi-wedges and digital display of temperature and speed.

TWINNY T, der Kombikeil-Schweissautomat

  • Easily operated
  • High welding speed
  • Digital display of temperature and speed
  • Optional data recording
  • Controlled temperature and drive system
  • Even with adverse environmental conditions optimal welding result thanks to hot air system

EXAMO USB

The EXAMO USB is ideal for measuring directly on the building site. Data recording on a memory card. Jaw distance 300 / 600 mm.

EXAMO USB, das Prüfgerät

  • Mobile construction, suitable for building sites
  • Handy, robust and light
  • Digital display of elongation, maximum force, tear-out force, test speed and position
  • Data recording on a memory card
  • Optionally for geotextiles
  • UNI

FUSION 3

Very easily operated thanks to optimal ergonomics and very slim construction. Because of its ideal length of 690 mm the FUSION 3 is optimally suited for landfill sites.

FUSION 3

  • Slim and long design (ideal for landfill sites at maximum output of 3.5 kg/h
  • Robust construction (suitable for building sites)
  • Continuous adjustment of the preheating temperature and output quantity
  • Output regulation possible during welding
  • Motor starting protection protects tool against cold start
  • 360° rotatable welding shoe, handle can be mounted in two positions (L or R)
  • Twist-free wire feeder

 

FUSION 3C

Despite its handy length of just 580 mm, FUSION 3C achieves an amazing output rate of 3.5 kg/h.

FUSION 3C

  • Compact and handy with a maximum output of 3.5 kg/h
  • Robust design (suitable for construction site use)
  • Stepless adjustment of preheating temperature and output quantity
  • Output regulation during welding possible
  • Motor starting protection protects the device against cold-starts
  • 360° rotatable welding shoe, 180° rotatable handle
  • Twist-free rod feed

WELDPLAST S2

The futuristic design of the WELDPLAST S2 is not only pleasing the eye.

WELDPLAST S2

  • Multifunctional display
  • Double sided, twist free wire intake
  • Freely adjustable swivel-mounted handgrip
  • Ergonomic construction
  • Maintenance-free blower
  • 360° rotating welding shoe
  • Low-noise, high power transmission

WELDPLAST S2 TPO

Its futuristic design is not only pleasing the eye. The new WELDPLAST S2 TPO lies well in the hand and becomes an indispenable partner.

WELDPLAST S2 TPO

  • Multifunctional display
  • Double sided, twist free wire intake
  • Freely adjustable swivel-mounted handgrip
  • Ergonomic construction
  • Maintenance-free blower
  • 360° rotating welding shoe
  • Low-noise, high power transmission

WELDPLAST S4

The WELDPLAST S4 is a compact, ergonomic screw extruder with brushless motor for pre-heated air. For use in apparatus construction and civil engineering.

WELDPLAST S4

  • Screw extruder with strip heating and integrated brushless hot air blower for welding seam preheating
  • Compact housing design reduces noise and ensures optimal cooling of the electronic and drive system
  • Terminal with illuminated graphic display and operation buttons suitable for building sites
  • Microprocessor for the regulation of the welding process and tool monitoring
  • Menu with function programs
  • Air flow max. 450 l/min
  • Twist-free wire feeder of 3 mm or 4 mm wire
  • Easily rotatable handle
  • Complies with DVS (German Welding Society) standards

WELDPLAST S6

With 6 kg/h output is the WELDPLAST S6 the most powerful screw extruder in its class. For apparatus construction and civil engineering.

WELDPLAST S6

  • Screw extruder with strip heating and integrated hot air blower for welding seam preheating
  • Compact housing design reduces noise and ensures optimal cooling of the electronic and drive system
  • Terminal with illuminated graphic display and operation buttons suitable for building sites
  • Microprocessor for the regulation of the welding process and tool monitoring
  • Menu with function programs
  • Air flow max. 450 l/min
  • Twist-free wire feeder of 4 mm or 5 mm wire
  • Easily rotatable handle
  • Complies with DVS (German Welding Society) standards

DeutschFrançaisItaliano