F. Jannone AG

Official distributor for Leister Switzerland

Apparatus & container construction

DIODE PID, the handy welding tool

The handy and powerful welding tool DIODE PID with steplessly adjustable welding temperature and external air supply.

DIODE PID, das handliche Schweissgerät

  • Digitally controlled and displayed temperatures
  • Overheating protection for heating elements
  • Adaptor tube with heat protection
  • Push-fit and screw-on nozzles for round and profile welding rods
  • Air supply provided by the ROBUST or MINOR blowers
  • Suitable for mobile assembling applications when connected to the MINOR blower

DIODE S, the handy welding tool

The handy and powerful welding tool Diode S with steplessly adjustable welding temperature and external air supply.

DIODE S, das handliche schweissgerät

  • Electronic temperature control
  • Overheating protection for heating elements
  • Adaptor tube with heat protection
  • Push-fit and screw-on nozzles for round and profile welding rods
  • Air supply provided by the ROBUST or MINOR blowers
  • Suitable for mobile assembling applications when connected to the MINOR blower

ELECTRO ST, the strong hand tool

The ELECTRON ST is a real powerhouse among Leister's hand tools.

ELECTRON ST, das starke Handgerät

  • Suitable for construction sites
  • Leister's most powerful hand tool
  • Easy-clean air filter
  • Carbon stop and heating element protection
  • Sturdy tool case
  • ELECTRON nozzles fit the new model.

HOT JET, S, the Small hand tool

The HOT-JET S ist the smallest hand tool worldwide. Low-noise and handy.

HOT JET S, das kleine Handgerät

  • Smallest hand tool worldwide
  • Temperature electronically and steplessly adjustable
  • Air flow electronically and steplessly adjustable
  • Electronic protection of the heating element
  • Low-noise
  • Integrated flexible tool stand

LABOR S, machine for pull welding and stitching

Small but scrappy: The LABOR S is a jack of all trades. It can be used to weld even difficult to access locations perfectly. It causes almost no fatigue, even for small hands.

LABOR S, Ziehschweiss- und Heftschweissgerät

  • Temperature adjustment via rotary knob
  • Very small and light device
  • Ideal for pull welding and stitching
  • Air supply with ROBUST blower, MINOR or compressed air
  • Ideal for mobile use when coupled with MINOR blower
  • Wide range of accessories

TRIAC AT, le robuste appareil de soufflerie à air chaud

The TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic.

TRIAC AT, das robuste Heissluftgerät

  • Suitable for the work site
  • Closed loop controlled temperature
  • Open loop controlled air volume
  • Intelligent «e-Drive» operating unit
  • Ergonomic handling
  • Modern design

TRIAC S, the economical hand tool

The TRIAC S is used worldwide and he is very reliable, compact and robust.

TRIAC S, das kostengünstige Handgerät

  • Cooled protective tube
  • Electronic protection of the heating element
  • Automatic switchoff at minimum carbon brush length
  • Multiple replacement of carbon brush possible
  • Suitable for continuous operation

TRIAC ST, the ergonomic hand tool

The TRIAC ST is the successor model of the TRIAC S. it is primarily used for welding and processing plastic.

TRIAC ST, das ergonomische Handgerät

  • Suitable for the work side
  • Ergonomic handling
  • Low weight (less than 1 Kg)
  • The nozzles are compatible with the Triac S and the Triac AT
  • Quick clean air filters
  • Automatic carbon stop (collector protection) and heating element protection

WELDING PEN R

The WELDING PEN R is a small, handy tool with digital welding temperature display, integrated heating element protection and external air supply.

WELDING PEN R

  • Worldwide the smallest hand tool with digital display of set and actual temperature
  • Fatigue-free working thanks to its ergonomic handle
  • Heating element protection
  • Cooled heating element tube
  • Exact temperature control thanks to micro processor

WELDING PEN S

The WELDING PEN S is an ultra-compact and flexible-to-use hand tool with external air supply and integrated heating element protection.

WELDING PEN S

  • Ultra-compact and flexible to use
  • Fatigue-free working thanks to its ergonomic handle
  • Heating element protection
  • Cooled protective tube

FUSION 2

Very easily operated thanks to optimal ergonomics and very slim construction. Because of its ideal length of 690 mm the FUSION 2 is optimally suited for landfill sites.

FUSION 2

  • Slim and long design (ideal for landfill sites at maximum output of 3.5 kg/h
  • Robust construction (suitable for building sites)
  • Continuous adjustment of the preheating temperature and output quantity
  • Output regulation possible during welding
  • Motor starting protection protects tool against cold start
  • 360° rotatable welding shoe, handle can be mounted in two positions (L or R)
  • Twist-free wire feeder

FUSION 3

Very easily operated thanks to optimal ergonomics and very slim construction. Because of its ideal length of 690 mm the FUSION 3 is optimally suited for landfill sites.

FUSION 3

  • Slim and long design (ideal for landfill sites at maximum output of 3.5 kg/h
  • Robust construction (suitable for building sites)
  • Continuous adjustment of the preheating temperature and output quantity
  • Output regulation possible during welding
  • Motor starting protection protects tool against cold start
  • 360° rotatable welding shoe, handle can be mounted in two positions (L or R)
  • Twist-free wire feeder

 

FUSION 3C

Despite its handy length of just 580 mm, FUSION 3C achieves an amazing output rate of 3.5 kg/h.

FUSION 3C

  • Compact and handy with a maximum output of 3.5 kg/h
  • Robust design (suitable for construction site use)
  • Stepless adjustment of preheating temperature and output quantity
  • Output regulation during welding possible
  • Motor starting protection protects the device against cold-starts
  • 360° rotatable welding shoe, 180° rotatable handle
  • Twist-free rod feed

WELDMAX

The WELDMAX is a versatile and low-noise hand extruder. With separated infinitely adjustable temperature control of air and mass. For apparatus construction and civil engineering.

WELDMAX

  • Extremely compact, handy and low-noise thanks to screwless conveyance and plastification
  • Lightest hand extruder
  • Ideally for cramped space conditions
  • Separated infinitely adjustable temperature control for plastification unit and pre-heated air
  • Complies with DVS (German Welding Society) standards

WELDPLAST S1

With the new WELDPLAST S1 compact extruder, you can achieve perfect seam quality with plate thicknesses of 4 to 12 mm. The double-sided, twist-free wire intake can work with 3 to 4 mm wires.

WELDPLAST S1

  • Functional, ergonomic design with comfort grip areas
  • Extremely high output power of 0.8 kg/h (HD-PE)
  • Integrated LED lighting and hanging point
  • Can work with all typical kinds of plastic
  • Multifunction panel with predefined welding parameters
  • BL blower, adjustable air volume

WELDPLAST S2

The futuristic design of the WELDPLAST S2 is not only pleasing the eye.

WELDPLAST S2

  • Multifunctional display
  • Double sided, twist free wire intake
  • Freely adjustable swivel-mounted handgrip
  • Ergonomic construction
  • Maintenance-free blower
  • 360° rotating welding shoe
  • Low-noise, high power transmission

WELDPLAST S2 PVC

The WELDPLAST S2 PVC has integrated corrosion protection and has been especially designed to satisfy the high requirements of PVC extrusion welding.

WELDPLAST S2 PVC

  • Optimized for PVC-U
  • Perfect weld seam quality
  • PVC specific extrusion menu
  • Corrosion protection
  • Standby mode

WELDPLAST S4

The WELDPLAST S4 is a compact, ergonomic screw extruder with brushless motor for pre-heated air. For use in apparatus construction and civil engineering.

WELDPLAST S4

  • Screw extruder with strip heating and integrated brushless hot air blower for welding seam preheating
  • Compact housing design reduces noise and ensures optimal cooling of the electronic and drive system
  • Terminal with illuminated graphic display and operation buttons suitable for building sites
  • Microprocessor for the regulation of the welding process and tool monitoring
  • Menu with function programs
  • Air flow max. 450 l/min
  • Twist-free wire feeder of 3 mm or 4 mm wire
  • Easily rotatable handle
  • Complies with DVS (German Welding Society) standards

WELDPLAST S6

With 6 kg/h output is the WELDPLAST S6 the most powerful screw extruder in its class. For apparatus construction and civil engineering.

WELDPLAST S6

  • Screw extruder with strip heating and integrated hot air blower for welding seam preheating
  • Compact housing design reduces noise and ensures optimal cooling of the electronic and drive system
  • Terminal with illuminated graphic display and operation buttons suitable for building sites
  • Microprocessor for the regulation of the welding process and tool monitoring
  • Menu with function programs
  • Air flow max. 450 l/min
  • Twist-free wire feeder of 4 mm or 5 mm wire
  • Easily rotatable handle
  • Complies with DVS (German Welding Society) standards

MIOR

The MINOR is a powerful blower for DIODE PID and DIODE S.

MINOR, das starke Gebläse

  • Lightweight and compact
  • Powerful
  • Mobile air supply for Leister welding machines

DeutschFrançaisItaliano